| ANEE |
GRIP LENGTH |
0.407 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
NAS 672 FED SPEC 1ST TREATMENT RESPONSE NUT |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| ABAJ |
LUBRICATION |
CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP OR DRY FILM |
| AAZE |
SHANK DIAMETER |
0.289 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5667 ASSN STD 2ND MATERIAL RESPONSE SLEEVE |
| AASB |
FASTENER LENGTH |
1.160 INCHES NOMINAL |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE I,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| ABAF |
EXPANSION DEVICE |
BREAK STEM |
| AAZG |
HEAD MAJOR DIAMETER |
0.499 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS6487 ASSN STD 1ST MATERIAL RESPONSE NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE |
| CQSX |
SHEAR STRENGTH |
11800 DOUBLE POUNDS PER SQUARE INCH |
| MATT |
MATERIAL |
NICKEL ALLOY X-750 SLEEVE |
| MATT |
MATERIAL |
STEEL COMP H11 NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT |
| AAZF |
SHANK STYLE |
BLIND RIVET, NUT AND BOLT (ASSEMBLY) |
| FEAT |
SPECIAL FEATURES |
USED ON T-38 TALON |