| ANEE |
GRIP LENGTH |
0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
SELF-LOCKING |
| CQSX |
SHEAR STRENGTH |
620 SINGLE POUNDS PER SQUARE INCH |
| SUPP |
SUPPLEMENTARY FEATURES |
SIMILAR TO NAS1399D5-3 NSN 5320-00-993-7358 EXCEPT W/ TRANS LUB 20204 |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-430 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| CQBC |
MINIMUM TENSILE STRENGTH |
375 POUNDS PER SQUARE INCH |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| AASB |
FASTENER LENGTH |
0.326 INCHES MAXIMUM |
| AAPC |
IDENTIFICATION CODE COLOR |
ORANGE AND YELLOW |
| HEAT |
HEAT TREATMENT |
H-38 STRAIN HARDENED LOCKING RING |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE STEM |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAJ |
LUBRICATION |
DRY FILM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE SLEEVE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
ANODIZE SLEEVE OR CHROMATE SLEEVE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5056 LOCKING RING |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 STEM |
| AAZE |
SHANK DIAMETER |
0.155 INCHES MINIMUM AND 0.159 INCHES MAXIMUM |
| HEAT |
HEAT TREATMENT |
T-4 SOLUTION HEAT TREATED SLEEVE |
| AAZG |
HEAD MAJOR DIAMETER |
0.282 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2017 SLEEVE |
| SFTT |
SURFACE TREATMENT |
CHROMATE STEM |