| ANEE |
GRIP LENGTH |
1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
ERR-090 |
| ABAJ |
LUBRICATION |
SOLID FILM |
| CQJX |
NOMINAL THREAD SIZE |
0.500 INCHES |
| AAZG |
HEAD MAJOR DIAMETER |
0.735 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| AASB |
FASTENER LENGTH |
2.080 INCHES MINIMUM AND 2.100 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
THIS IS A FASTENER ASSEMBLY CONSISTING OF AN ALLOY STEEL PIN AND ALUMINUM COLLAR; 0.805 IN.-0.815 IN. COLLAR OD,0.640 IN. COLLAR OVERALL HEIGHT,0.500 IN. COLLAR ID |
| AATB |
WIDTH BETWEEN FLATS |
0.219 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM BODY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAZE |
SHANK DIAMETER |
0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 4130 BODY OR STEEL COMP 4140 BODY OR STEEL COMP 8740 BODY |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE COLLAR |
| HEAT |
HEAT TREATMENT |
T-6 SOLUTION HEAT TREATED COLLAR |
| SFTT |
SURFACE TREATMENT |
ANODIZE COLLAR |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 COLLAR |
| CQSX |
SHEAR STRENGTH |
95000 SINGLE POUNDS PER SQUARE INCH |
| AAZF |
SHANK STYLE |
PIN-RIVET, STRAIGHT, THREADED |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE BODY OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE BODY OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE BODY |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| AASU |
HEAD HEIGHT |
0.103 INCHES MINIMUM AND 0.115 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
HI-SHEAR CORPORATION SPEC. 311,CAGEC 73197 MFR REF SINGLE TREATMENT RESPONSE COLLAR |