| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| FEAT |
SPECIAL FEATURES |
MATERIAL BREAKDOWN AS FOLLOWS, SLEVE, ALLOY STEEL 4027 OR 4037 PER CHEMICAL REQUIREMENTS OF ASTM A752;SERRATED PIN IS ALLOY STEEL 8740 PER CHEMICAL REQUIREMENTS OF MIL-S-6049 OR ASTM A752;MECHANICAL LOCK IS CARBON OR ALLOY STEEL CONFORMING TO CHEMICAL REQUIREMENTS OF 1010, 1020, 1144, 4037 OR 4130 OF FED STD 66, A286 CRES CONFORMING TO AMS 5737 OR 316 CRES PER AMS5690;FINISH, SLEEVE , CADMIUM PLATE PER QQ-P-416, TYPE 2 CLASS 2;SERRATED PIN, CADMIUM PLATE PER QQ-P-416, TYPE 2 CLASS 3 AND PER MIL-F-81177;MECHANICAL LOCK, CADMIUM PLATE PER QQ-P-416 TYPE 2 CLASS 2 (CARBON AND ALLOY STEEL) AND CRES PASSIVATE PER QQ-P-35 |
| ANEE |
GRIP LENGTH |
0.312 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| AAZE |
SHANK DIAMETER |
0.190 INCHES NOMINAL |
| AAZF |
SHANK STYLE |
SELF-PLUGGING |
| AAZG |
HEAD MAJOR DIAMETER |
0.244 INCHES NOMINAL |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM MANDREL AND 53.0 ROCKWELL C MAXIMUM MANDREL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTMA752 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 4027 SLEEVE OR STEEL COMP 4037 SLEEVE |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM SLEEVE AND 45.0 ROCKWELL C MAXIMUM SLEEVE |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
RIVET, BLIND, HIGH STRENGTH, PULL TYPE, 100 DEGREE FLUSH REDUCED HEAD, 112 KSI SHEAR |
| AGAV |
END ITEM IDENTIFICATION |
F-16 AIRCRAFT |