| ADPW |
OUTSIDE CORNER RADIUS |
0.060 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| ADVD |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.130 INCHES MINIMUM AND 0.155 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR |
| ZZZV |
FSC APPLICATION DATA |
STARTERS,ENGINE,AIR TURBINE,AIRCRAFT AND GUIDED MISSILE PRIME MOVER TYPE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-A-7021,CL 1 MIL SPEC ALL MATERIAL RESPONSES OVERALL |
| MATT |
MATERIAL |
ASBESTOS OVERALL AND RUBBER NATURAL OVERALL OR RUBBER SYNTHETIC OVERALL |
| AAUB |
HOLE DIAMETER |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AECS |
BOLT HOLE QUANTITY |
4 |
| ABMK |
OVERALL WIDTH |
1.160 INCHES MINIMUM AND 1.220 INCHES MAXIMUM |
| ABVL |
APERTURE DIAMETER |
0.910 INCHES MINIMUM AND 0.930 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.160 INCHES MINIMUM AND 1.220 INCHES MAXIMUM |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.130 INCHES MINIMUM AND 0.155 INCHES MAXIMUM |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
SOLID SINGLE OR COMPOSITION |
| ADVM |
CROSS-SECTIONAL THICKNESS |
0.032 INCHES NOMINAL |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM |