| CZGB |
OUTSIDE EDGE TO LARGEST BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.196 INCHES NOMINAL |
| LBMA |
LUBRICATION MATERIAL |
RUBBER NEOPRENE OVERALL |
| CZFZ |
OUTSIDE EDGE TO SMALLEST BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.196 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
CONTROL,ANTENNA |
| CWQP |
SMALLEST BOLT HOLE QUANTITY |
4 |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR BEVELED W/APERATURE |
| ABVL |
APERTURE DIAMETER |
1.656 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
1.891 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
CLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL |
| ADUP |
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH |
0.196 INCHES NOMINAL |
| BYWW |
SMALLEST BOLT HOLE DIAMETER |
0.147 INCHES NOMINAL |
| CZGA |
OUTSIDE EDGE TO LARGEST BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.196 INCHES NOMINAL |
| CZFY |
OUTSIDE EDGE TO SMALLEST BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.196 INCHES NOMINAL |
| CZFX |
CENTER TO CENTER DISTANCE BETWEEN LARGEST BOLT HOLES |
1.500 INCHES NOMINAL |
| LMDC |
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION |
AMS3222 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ADUQ |
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH |
0.196 INCHES NOMINAL |
| BYWX |
LARGEST BOLT HOLE DIAMETER |
0.150 INCHES NOMINAL |
| CWQZ |
LARGEST BOLT HOLE QUANTITY |
4 |
| AEAH |
LUBRICATION METHOD |
IMPREGNATED |
| ABHP |
OVERALL LENGTH |
1.891 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
NAS4182 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ADVM |
CROSS-SECTIONAL THICKNESS |
0.020 INCHES NOMINAL |
| CZFW |
CENTER TO CENTER DISTANCE BETWEEN SMALLEST BOLT HOLES |
1.375 INCHES NOMINAL |