| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.250 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.464 INCHES MINIMUM AND 0.484 INCHES MAXIMUM |
| AHLM |
FIRST LEG SLOT WIDTH |
0.530 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
9.000 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
9.000 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
0.820 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.940 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
SECOND SLOT ON FIRST LEG HOLE ARRANGEMENT STYLE WITH SAME DIMENSIONSAS OPPOSITE SIDE |
| SFTT |
SURFACE TREATMENT |
PAINT |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| MATT |
MATERIAL |
STEEL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
6.430 INCHES MINIMUM AND 6.450 INCHES MAXIMUM |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.075 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
6.990 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.000 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
9.310 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.940 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
9.000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.030 INCHES NOMINAL |