| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| SFTT |
SURFACE TREATMENT |
OXIDE FILM |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.203 INCHES MINIMUM AND 0.207 INCHES MAXIMUM |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
1.500 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
3.900 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
-1L-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.063 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| ADLK |
FIRST LEG LENGTH |
0.980 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHQA |
CENTER SECTION WIDTH |
3.900 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.265 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| AHQP |
FIRST LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| ADLL |
SECOND LEG LENGTH |
1.000 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.870 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
3.900 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
SECOND LEG END CONCAVE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.440 INCHES NOMINAL |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
1.500 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |