| AHLN |
SECOND LEG HOLE DIAMETER |
0.330 INCHES MINIMUM AND 0.337 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHPX |
SECOND LEG THICKNESS |
0.038 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.038 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-698,COND 4 FED SPEC SINGLE MATERIAL RESPONSE OR AMS 5042 ASSN STD 1ST MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL COMP 1009 OR STEEL COMP 1020 OR STEEL COMP 1015 OR STEEL COMP 1008 OR STEEL COMP 1018 OR STEEL COMP 1010 |
| ADLK |
FIRST LEG LENGTH |
0.330 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLF |
SECOND LEG WIDTH |
0.460 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| AHQN |
FIRST LEG WIDTH |
0.460 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| ADLL |
SECOND LEG LENGTH |
0.532 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.230 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| FEAT |
SPECIAL FEATURES |
2 SLOTS IN FIRST LEG 0.100 IN. W BY 0.215 IN. DEEP CUT FROM TOP OF FIRST LEG |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.240 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |