| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.310 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-18728,COND N MIL SPEC SINGLE MATERIAL RESPONSE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLF |
SECOND LEG WIDTH |
0.620 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.050 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.620 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.310 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| AHPX |
SECOND LEG THICKNESS |
0.050 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.310 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
HEAT TREATMENT: NORMALIZED |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.310 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.254 INCHES MINIMUM AND 0.262 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.310 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.069 INCHES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.310 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.060 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.191 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 8630 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |