| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AJFQ |
SECOND LEG END RADIUS |
0.370 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.050 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.150 INCHES MINIMUM AND 1.190 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.370 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.730 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.050 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHMA |
SECOND LEG SLOT WIDTH |
0.190 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| ZZZV |
FSC APPLICATION DATA |
ENGINE,ACFT,TURBO-PROP |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.410 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.000 INCHES MINIMUM AND 1.040 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |