| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.230 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.180 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.320 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
THREADED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/7 FED SPEC SINGLE MATERIAL RESPONSE |
| ADLL |
SECOND LEG LENGTH |
0.600 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.312 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AHLF |
SECOND LEG WIDTH |
0.352 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.093 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.198 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.130 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHPW |
FIRST LEG THICKNESS |
0.062 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.247 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.093 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.062 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.320 INCHES NOMINAL |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
TURNED EDGE BOTH SIDES |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |