| AHPW |
FIRST LEG THICKNESS |
0.120 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLL |
SECOND LEG LENGTH |
2.111 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS AND TAPERED |
| AHLF |
SECOND LEG WIDTH |
1.786 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.036 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.282 INCHES MINIMUM AND 0.287 INCHES MAXIMUM |
| HEAT |
HEAT TREATMENT |
ANNEALED |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| ADLK |
FIRST LEG LENGTH |
0.880 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5520 ASSN STD SINGLE MATERIAL RESPONSE |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.500 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.361 NOMINAL INCHES |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.500 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.250 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.120 INCHES NOMINAL |