| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.952 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| ADLK |
FIRST LEG LENGTH |
0.765 INCHES MINIMUM AND 0.848 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
1.452 INCHES MINIMUM AND 1.576 INCHES MAXIMUM |
| AHLG |
SECOND LEG CORNER RADIUS |
0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS AND TAPERED |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.214 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.604 INCHES MINIMUM AND 0.634 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.110 INCHES MINIMUM AND 1.192 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 410 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |