| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.380 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHLF |
SECOND LEG WIDTH |
1.300 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS AND TAPERED |
| AHQN |
FIRST LEG WIDTH |
2.539 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.310 INCHES NOMINAL |
| AHQW |
FIRST LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH |
1.919 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| SFTT |
SURFACE TREATMENT |
PAINT |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.959 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.310 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHPX |
SECOND LEG THICKNESS |
0.160 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.380 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.160 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.900 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
159.0 DEGREES NOMINAL |
| STYL |
STYLE DESIGNATOR |
OFFSET ANGLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.345 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| AHQP |
FIRST LEG CORNER RADIUS |
0.310 INCHES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.031 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
RIGHT HAND |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| MATT |
MATERIAL |
STEEL COMP 4130 |