| AHLN |
SECOND LEG HOLE DIAMETER |
0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.750 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
38.0 DEGREES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHQN |
FIRST LEG WIDTH |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AJFQ |
SECOND LEG END RADIUS |
0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 4910 ASSN STD SINGLE MATERIAL RESPONSE |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| CSSR |
SECOND LEG ANGLE |
38.0 DEGREES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| MATT |
MATERIAL |
TITANIUM ALLOY |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHQB |
CENTER SECTION THICKNESS |
0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |