| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.156 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.032 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.156 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLF |
SECOND LEG WIDTH |
0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.192 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE |
| AHQN |
FIRST LEG WIDTH |
0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.182 NOMINAL MILS AND 0.192 NOMINAL CENTIMETERS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
580-0036-00 FSCM 13499 MFR REF SINGLE TREATMENT RESPONSE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| ADLL |
SECOND LEG LENGTH |
0.531 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AJFP |
FIRST LEG END RADIUS |
0.156 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.156 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.094 INCHES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
RADIO SETS |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| HEAT |
HEAT TREATMENT |
H-32 STRAIN HARDENED |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| ADLK |
FIRST LEG LENGTH |
0.359 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.156 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.032 INCHES NOMINAL |