| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.092 INCHES NOMINAL |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
RAISED CENTER BOTH ENDS |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.066 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.250 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.015 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.625 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.128 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.125 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.077 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.500 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.500 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.368 NOMINAL INCHES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.093 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.368 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.015 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |