| AARN |
FABRICATION METHOD (NON-CORE) |
ANY ACCEPTABLE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.152 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.936 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.312 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.436 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| ADLK |
FIRST LEG LENGTH |
1.370 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
| AHQP |
FIRST LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.200 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.376 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
2.212 INCHES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.312 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.312 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 410 |
| AHPW |
FIRST LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLF |
SECOND LEG WIDTH |
2.776 INCHES NOMINAL |