| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/11,T6511 FED SPEC SINGLE MATERIAL RESPONSE |
| ADLK |
FIRST LEG LENGTH |
0.875 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
LACQUER |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHPW |
FIRST LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
F1-1-29-29 98897 MFR REF SINGLE TREATMENT RESPONSE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.265 INCHES MINIMUM AND 0.272 INCHES MAXIMUM |
| AHQP |
FIRST LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.400 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.400 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.940 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.750 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |