| AHPW |
FIRST LEG THICKNESS |
0.312 INCHES NOMINAL |
| HEAT |
HEAT TREATMENT |
O-ANNEALED, RECRYSTALLIZED |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.625 INCHES NOMINAL |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
RAISED CENTER FIRST LEG |
| AHLM |
FIRST LEG SLOT WIDTH |
0.531 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
3.000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.750 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.750 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/8 T6 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-200/8 T6 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-200/4 H112 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/11 T6 FED SPEC 3RD MATERIAL RESPONSE |
| AHPX |
SECOND LEG THICKNESS |
0.312 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLF |
SECOND LEG WIDTH |
6.750 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
ENAMEL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.875 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.062 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
0.750 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHMA |
SECOND LEG SLOT WIDTH |
0.531 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6062 OR ALUMINUM ALLOY 6061 |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
6.750 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.875 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |