| AHLK |
FIRST LEG HOLE DIAMETER |
0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.240 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHLG |
SECOND LEG CORNER RADIUS |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHPX |
SECOND LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.337 INCHES MINIMUM AND 0.351 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.720 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 321 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
2.020 INCHES MINIMUM AND 2.080 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |