| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.562 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.500 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-741 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLR |
SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH |
1.125 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERBORED AND THREADED |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.938 NOMINAL INCHES |
| ADLK |
FIRST LEG LENGTH |
1.062 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.125 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.312 INCHES NOMINAL |
| AHLH |
SECOND LEG END WIDTH |
1.125 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.312 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.500 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AKBU |
SECOND LEG STYLE |
SQUARE AND TAPERED |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.312 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.125 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |