| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
3.700 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
120.0 DEGREES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLL |
SECOND LEG LENGTH |
1.170 INCHES MINIMUM AND 1.230 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
3.670 INCHES MINIMUM AND 3.730 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
4001,FSCM 97499 MFR REF SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.208 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.208 INCHES MINIMUM AND 0.214 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| HEAT |
HEAT TREATMENT |
T-3 SOLUTION HEAT TREATED |
| AHPX |
SECOND LEG THICKNESS |
0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.070 INCHES MINIMUM AND 1.130 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |