| AJFQ |
SECOND LEG END RADIUS |
0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
ANY ACCEPTABLE |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.000 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
299-099-031 BELL HELICOPTER CO. MFR REF SINGLE TREATMENT RESPONSE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AKBU |
SECOND LEG STYLE |
END RADIUS AND TAPERED |
| AHLL |
FIRST LEG SLOT LENGTH |
0.390 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
105.0 DEGREES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.390 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.070 INCHES MINIMUM AND 1.130 INCHES MAXIMUM |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.249 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.255 INCHES MINIMUM AND 0.258 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CHROMATE ZINC |
| AHLF |
SECOND LEG WIDTH |
1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| AHQP |
FIRST LEG CORNER RADIUS |
0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |