| AHLG |
SECOND LEG CORNER RADIUS |
0.280 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.190 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| CSSQ |
FIRST LEG ANGLE |
68.0 DEGREES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.100 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| AHPW |
FIRST LEG THICKNESS |
0.090 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLF |
SECOND LEG WIDTH |
1.250 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.250 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.470 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHPX |
SECOND LEG THICKNESS |
0.090 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.038 INCHES MINIMUM AND 0.046 INCHES MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.750 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-362,T42 FED SPEC SINGLE MATERIAL RESPONSE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.250 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.227 INCHES MINIMUM AND 0.231 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |