| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.266 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.625 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| FEAT |
SPECIAL FEATURES |
GLOSS YELLOW COLOR |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| SFTT |
SURFACE TREATMENT |
OXIDE FILM OR PAINT OR PRIMER |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE OR TT-P-1757 FED SPEC 2ND TREATMENT RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.375 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLF |
SECOND LEG WIDTH |
1.250 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHQB |
CENTER SECTION THICKNESS |
0.125 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.000 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
4.000 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.625 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.438 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.625 INCHES NOMINAL |
| HEAT |
HEAT TREATMENT |
H-32 STRAIN HARDENED |
| AHQN |
FIRST LEG WIDTH |
1.250 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
4.625 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
1.250 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |