| AHLN |
SECOND LEG HOLE DIAMETER |
0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
ANY ACCEPTABLE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHPX |
SECOND LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.297 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHQN |
FIRST LEG WIDTH |
4.227 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| ADLK |
FIRST LEG LENGTH |
0.805 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.297 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.867 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
| AHQP |
FIRST LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLF |
SECOND LEG WIDTH |
0.500 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.340 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
ONE ADDITIONAL MTG HOLE ON SECOND LEG 0.219 IN. DIA,1.317 IN. FROMRIGHT HAND SIDE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 410 |
| AJFQ |
SECOND LEG END RADIUS |
0.250 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM |