| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.187 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLL |
SECOND LEG LENGTH |
0.750 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.187 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.750 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.375 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.437 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.101 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
HOLE IN FIRST LEG 0.187 IN. DIA,RIGHT HAND |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.187 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6063 |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.128 INCHES MINIMUM AND 0.131 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/9,T52 FED SPEC SINGLE MATERIAL RESPONSE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHPW |
FIRST LEG THICKNESS |
0.062 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.688 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.699 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.062 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE 1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.250 NOMINAL INCHES |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |