| MATT |
MATERIAL |
STEEL COMP 1010 |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.312 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.000 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AJFQ |
SECOND LEG END RADIUS |
0.500 INCHES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.312 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.210 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| ADLL |
SECOND LEG LENGTH |
1.375 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.000 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHQW |
FIRST LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH |
0.625 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.188 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL2 FED SPEC ALL TREATMENT RESPONSES |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| FEAT |
SPECIAL FEATURES |
HOLE SECOND LEG EXTERNAL KEYWAY 1/8 IN. BY 3/32 IN. |
| AHPX |
SECOND LEG THICKNESS |
0.040 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.040 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.136 INCHES MINIMUM AND 0.139 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |