| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHPX |
SECOND LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AJFP |
FIRST LEG END RADIUS |
0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AJFQ |
SECOND LEG END RADIUS |
0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.500 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.500 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 410 |