| STYL |
STYLE DESIGNATOR |
ANGLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-T-9046,TYPE 1,COMP C MIL SPEC SINGLE MATERIAL RESPONSE |
| ADLK |
FIRST LEG LENGTH |
0.800 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.350 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.360 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.256 INCHES MINIMUM AND 0.263 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.350 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.350 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.200 INCHES MINIMUM AND 0.206 INCHES MAXIMUM |
| AJFQ |
SECOND LEG END RADIUS |
0.350 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.700 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.350 INCHES NOMINAL |
| MATT |
MATERIAL |
TITANIUM ALLOY |
| AHPX |
SECOND LEG THICKNESS |
0.040 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.040 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.880 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.700 INCHES NOMINAL |