| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.203 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5598 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLF |
SECOND LEG WIDTH |
1.441 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHLG |
SECOND LEG CORNER RADIUS |
0.203 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.785 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.203 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.768 INCHES NOMINAL |
| MATT |
MATERIAL |
NICKEL ALLOY X-750 |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.004 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |