| ADLK |
FIRST LEG LENGTH |
0.900 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-L-81352 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 3RD TREATMENT RESPONSE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| SFTT |
SURFACE TREATMENT |
OXIDE FILM AND LACQUER ACRYLIC AND PRIMER |
| AHLH |
SECOND LEG END WIDTH |
0.750 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
2.500 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE AND TAPERED |
| MATT |
MATERIAL |
ALUMINUM |
| AHLF |
SECOND LEG WIDTH |
1.500 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.380 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.040 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.500 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.040 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,ALCLAD 2024,T62 FED SPEC SINGLE MATERIAL RESPONSE |