| ADLK |
FIRST LEG LENGTH |
0.875 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.218 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.812 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHPX |
SECOND LEG THICKNESS |
0.060 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.125 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.750 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.625 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLF |
SECOND LEG WIDTH |
1.625 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
TT-E-529 FED SPEC SINGLE TREATMENT RESPONSE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.438 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| SFTT |
SURFACE TREATMENT |
ENAMEL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.938 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| FEAT |
SPECIAL FEATURES |
ONE ADDITIONAL HOLE ON SECOND LEG 0.156 IN. DIA 0.500 IN. FROM EDGE TO HOLE CENTER ALONG WIDTH |
| AHPW |
FIRST LEG THICKNESS |
0.060 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AJFQ |
SECOND LEG END RADIUS |
0.938 INCHES NOMINAL |