| ABRY |
LENGTH |
1.283 INCHES MINIMUM AND 1.293 INCHES MAXIMUM |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
0.130 INCHES NOMINAL |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
0.130 INCHES NOMINAL |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
1.023 INCHES MINIMUM AND 1.033 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
1.605 INCHES MINIMUM AND 1.615 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| ADNU |
CORNER RADIUS |
0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| ADQK |
MOUNTING OPENING SHAPE STYLE |
UNTHREADED HOLE |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, FOUR HOLES |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
FLAT |
| ADPR |
BODY THICKNESS |
1.023 INCHES MINIMUM AND 1.033 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| AAUB |
HOLE DIAMETER |
0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM |
| ABGL |
WIDTH |
1.865 INCHES MINIMUM AND 1.875 INCHES MAXIMUM |
| ADQB |
SECURING DEVICE TYPE |
THREADED FASTENER |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |