| AHLG |
SECOND LEG CORNER RADIUS |
0.200 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHQP |
FIRST LEG CORNER RADIUS |
0.200 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| ADLL |
SECOND LEG LENGTH |
1.170 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.200 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| ADLK |
FIRST LEG LENGTH |
0.560 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.200 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.200 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.200 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.100 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.695 INCHES MINIMUM AND 0.705 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
1.100 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.695 INCHES MINIMUM AND 0.705 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |