| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.166 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHQN |
FIRST LEG WIDTH |
0.515 INCHES MINIMUM AND 0.546 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.702 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.515 INCHES MINIMUM AND 0.546 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.215 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT |
SURFACE TREATMENT |
PAINT |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLL |
FIRST LEG SLOT LENGTH |
0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.125 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.640 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.062 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.248 NOMINAL MILS AND 0.252 NOMINAL CENTIMETERS |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.156 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |