| CWPG |
SECOND LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.885 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.125 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| FEAT |
SPECIAL FEATURES |
1ST HOLE 0.189 TO 0.195 IN. DIA IN LINE WITH MATING PART |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.453 INCHES MINIMUM AND 0.463 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.500 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/8,6061,T6 FED SPEC 1ST MATERIAL RESPONSE OR MIL-C-11866,356-T6 MIL SPEC 2ND MATERIAL RESPONSE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.750 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.500 NOMINAL INCHES |
| MATT |
MATERIAL |
ALUMINUM ALLOY |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.870 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| SFTT |
SURFACE TREATMENT |
ENAMEL |
| AHLF |
SECOND LEG WIDTH |
2.350 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHPW |
FIRST LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.339 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.350 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.500 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
TT-E-489 FED SPEC SINGLE TREATMENT RESPONSE |
| AHLH |
SECOND LEG END WIDTH |
1.850 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.875 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |