| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-8585 MIL SPEC 1ST TREATMENT RESPONSE OR T-E-489 FED STD 2ND TREATMENT RESPONSE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.405 INCHES MINIMUM AND 0.412 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHLF |
SECOND LEG WIDTH |
3.000 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.850 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
0.560 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.690 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
3.250 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHQA |
CENTER SECTION WIDTH |
3.000 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHQN |
FIRST LEG WIDTH |
3.000 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHQB |
CENTER SECTION THICKNESS |
0.125 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PRIMER AND ENAMEL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-M-44 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/8 T6 FED SPEC 2ND MATERIAL RESPONSE |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.300 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.000 INCHES NOMINAL |
| MATT |
MATERIAL |
MAGNESIUM ALLOY AZ31B OR ALUMINUM ALLOY 6061 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |