| AHLG |
SECOND LEG CORNER RADIUS |
0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
B50T1270 FSCM 99207 MFR REF SINGLE MATERIAL RESPONSE |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHLF |
SECOND LEG WIDTH |
0.460 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.128 INCHES MINIMUM AND 0.132 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.460 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHPW |
FIRST LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.690 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MATT |
MATERIAL |
STEEL |
| AHPX |
SECOND LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.162 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSQ |
FIRST LEG ANGLE |
88.5 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.440 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |