| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLL |
SECOND LEG LENGTH |
0.750 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| CBBL |
FEATURES PROVIDED |
NUT |
| SFTT |
SURFACE TREATMENT |
PLASTIC EPOXY |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MMS405,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-P-250/5,T72 OR T81 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/3,T8511 FED SPEC SINGLE MATERIAL RESPONSE |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.064 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHLF |
SECOND LEG WIDTH |
1.500 INCHES MINIMUM AND 1.505 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHPX |
SECOND LEG THICKNESS |
0.064 INCHES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.500 INCHES MINIMUM AND 1.505 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.268 INCHES MINIMUM AND 0.271 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| ADLK |
FIRST LEG LENGTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
NUT LOCATED ON LEFT HAND OF SECOND LEG IN AN INVERTED POSTION |