| STYL |
STYLE DESIGNATOR |
ANGLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD SINGLE MATERIAL RESPONSE |
| AHQN |
FIRST LEG WIDTH |
2.062 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.527 INCHES MINIMUM AND 0.535 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.127 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHPX |
SECOND LEG THICKNESS |
0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.188 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.559 INCHES MINIMUM AND 0.567 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.201 INCHES MINIMUM AND 0.208 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
2.062 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.688 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM |
| ZZZV |
FSC APPLICATION DATA |
BRACKET,ANGLE |
| MATT |
MATERIAL |
STEEL COMP 8630H |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |