| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.562 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHQN |
FIRST LEG WIDTH |
1.125 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.260 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.081 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.138 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLF |
SECOND LEG WIDTH |
1.125 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/4,T3 FED SPEC SINGLE MATERIAL RESPONSE |
| ADLL |
SECOND LEG LENGTH |
1.500 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.081 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.750 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.375 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PRIMER |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.188 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
1.375 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
TT-P-1757 MIL SPEC SINGLE TREATMENT RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| ADLK |
FIRST LEG LENGTH |
0.750 INCHES NOMINAL |