| AARN |
FABRICATION METHOD (NON-CORE) |
ANY ACCEPTABLE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
4.250 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.191 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AHPW |
FIRST LEG THICKNESS |
0.064 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
5.000 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
TWO OBLONG HOLES 0.750 IN. DIA 2.000 IN. LG |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.312 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AJFQ |
SECOND LEG END RADIUS |
0.125 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
5.000 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.125 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.312 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.064 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.438 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.875 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |