| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.240 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.880 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.279 INCHES MINIMUM AND 0.288 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.380 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.032 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5516 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.320 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.880 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| ADLL |
SECOND LEG LENGTH |
1.790 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AHPW |
FIRST LEG THICKNESS |
0.082 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.200 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.082 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |