| AARN |
FABRICATION METHOD (NON-CORE) |
ANY ACCEPTABLE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHPX |
SECOND LEG THICKNESS |
0.085 INCHES MINIMUM AND 0.101 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.250 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| ADLL |
SECOND LEG LENGTH |
1.250 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.232 INCHES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.450 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| ADLK |
FIRST LEG LENGTH |
0.767 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.103 INCHES MINIMUM AND 1.128 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.366 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AJFQ |
SECOND LEG END RADIUS |
0.312 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.732 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.085 INCHES MINIMUM AND 0.101 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5536 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |