| AHQQ |
FIRST LEG END WIDTH |
0.562 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-E-15090 TYPE 2 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHQN |
FIRST LEG WIDTH |
0.750 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| AHLF |
SECOND LEG WIDTH |
0.750 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.2500 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.188 INCHES NOMINAL |
| AHLH |
SECOND LEG END WIDTH |
0.562 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
2ND LEG HAS 0.250 IN. WITH SLOT CENTERED IN EDGE ALONG WIDTH THRU TO HOLE; HOLE HAS KEYWAY AT 30 DEG ANGLE FROM CENTER OF WIDTH AT BEND |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.250 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.188 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
ENAMEL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.164 INCHES MINIMUM AND 0.169 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.375 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.0000 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.512 INCHES MINIMUM AND 0.525 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.040 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.040 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.375 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-318,COND.1/2H MIL SPEC SINGLE MATERIAL RESPONSE |