| AJFP |
FIRST LEG END RADIUS |
0.215 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLL |
SECOND LEG LENGTH |
0.660 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.193 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.260 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.160 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.193 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| ADLK |
FIRST LEG LENGTH |
0.660 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PAINT |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.260 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLF |
SECOND LEG WIDTH |
0.360 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| AJFQ |
SECOND LEG END RADIUS |
0.215 INCHES NOMINAL |
| HEAT |
HEAT TREATMENT |
T-3 SOLUTION HEAT TREATED |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.160 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.040 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.040 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.360 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |