| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.440 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.000 INCHES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.810 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.437 INCHES MINIMUM AND 0.444 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
1.000 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
150.0 DEGREES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHPW |
FIRST LEG THICKNESS |
0.064 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| AHQB |
CENTER SECTION THICKNESS |
0.064 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,ALCLAD T4 FED SPEC SINGLE MATERIAL RESPONSE |
| ADLK |
FIRST LEG LENGTH |
0.880 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHPZ |
CENTER SECTION HEIGHT |
0.300 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| AHPX |
SECOND LEG THICKNESS |
0.064 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
150.0 DEGREES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.440 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.810 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHQA |
CENTER SECTION WIDTH |
1.000 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.880 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |